Marshmallow update for BlackBerry Priv by TELUS

May is the date decided to release MM for priv by telus http://goo.gl/25jnZ6

from xda-developers http://ift.tt/1r7NVdA
via IFTTT

Brick phone!

I need help, my phone brick and when i try to reinstal the stock room the lg flash tool says "upgrade stopped due to an error" i try to access the recovery mode but my phone don't enter in recovery mode, i press and hold power + volume down, when the lg logo show up i loose the button and press and hold again but nothing happens, im start to feel a little worried because this never heppened with this phone.

from xda-developers http://ift.tt/1NL1I4r
via IFTTT

Galaxy s5 stock firmware (help)

So yesterday, i bought my secondhand galaxy s5 on my local store, the store didn't give me the box or any document about it. so i tried to figure out if this one isn't a fake one. the label behind the battery told me that this is a g900f variant, still being curious i check the imei on imei.info and it says that this is an original g900f (i also checked the phone build on the setting menu it also said this is a proper g900f), but long story short i found out that my phone is already rooted by the previous owner, so i tried to unroot it, but when i do it the phone stuck in the bootloop, so i downloaded odin, usb driver, and a new stock rom for the g900f on my laptop, i get the phone to the download mode (odin mode? i dunno what is it called) and it said my device is a g900v variant, and when i tried to flash the g900f stock rom i always failed. now i'm confused wheter if my s5 indeed is a real g900f or a g900v. what should i do now? do i have to download a g900v stock rom, or try another g900f stock rom? :confused:

from xda-developers http://ift.tt/1r7NSyu
via IFTTT

Capps from COS13

Hello,
I searched the internet for a capps.zip file from COS13 to flash on my One running CM13 as the truecaller integration is absent from the dialler in the unofficial capps v2[probably modded from the COS12.1 to work with CM13] , which is the feature i liked the most,not to mention,of course, also the call receiving and in-call UI of the COS dialler... and I do not know jack about developing myself:confused: so if someone could extract the files from COS13 and make them into a flashable zip..
Thank you.

from xda-developers http://ift.tt/21mVQk9
via IFTTT

my tablet bricked

Hi.
My tablet is Lenovo A3500 H_V

Yesterday was my phone is being charged. I disconnected the charger

Phone is shut down

I just have it turned each the screen of the brand Lenovo:(

from xda-developers http://ift.tt/1SCNd2T
via IFTTT

can't backup rom on non rooted sd rn3 16 gb.

Cant backup my rn3 sd on lappy.
Message came is : device cannot b backup.
I m on 7230 updated version

from xda-developers http://ift.tt/21mVQk5
via IFTTT

Huawei p7 ascend SIM LOCK PROBLEM

My mobile has a sim lock problem,it worked awesome in Belgium.I brought it in another country now it does not accept the sim.Please guide me.

from xda-developers http://ift.tt/1pUy0OW
via IFTTT

[ROM] CM12.1 Bugless For Micromax Canvas Hue AQ5000

CM12.1 Based On Lollipop 5.1.1 For Micromax Canvas Hue;)
1) ROM Link: http://ift.tt/1NcY4A7
2) Philz Recovery + Flashing Guides http://ift.tt/1pUy01v

Flashing Guides And Tools On The 2nd Link

Thanks To "AJIT GURAYA" Who Compiled This ROM

from xda-developers http://ift.tt/1NcY4A9
via IFTTT

My phone bricked(showing as RELINK HS QDLOADER 9008 (COM11) in device manager

:crying::crying::crying::crying:
I have moto g 1st Gen XT1033 and it got hard bricked when I tried to reinstall Lolipop 5.1 (Now understood a wrong file for this phone). From then the device wont start, wont boot into boot loader mode, wont do anything. I tried many things which are suggested on internet but nothing worked. For now, if I long press power on button, LED flashes and nothing after that. Please help me in getting back my device into life. I tried doing a blank flash but getting below message

F:\sanjay phone\blankflash\blankflash>.\qboot.exe blank-flash
opening device: \\.\COM11
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.003s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM11
OKAY [ 0.003s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)

F:\sanjay phone\blankflash\blankflash>pause
Press any key to continue . . .

I TRIED DISCONNECTING THE BATTERY AND CHARGING AND TRYING TO RE CONNECT AGAIN BUT THAT DIDN'T WORK TOO.

PLEASE HELP :crying::crying::crying::crying::crying:

from xda-developers http://ift.tt/26GaFSF
via IFTTT

s5 verizon error

Hi. can anybody help me? sorry for my bad English

the phone works in recovery and download mode but can't load the oficial firmware with odin :\ (i downloaded the oficial s5 verizon firmware 5.0 for sammobile)

http://ift.tt/21mTCkL

http://ift.tt/26GaBCG

ERRORS:

UDC START
SECURE CHECK FAIL: aboot
SECURE CHECK FAIL: PIT

odin:

aboot.mbn
NAND WRITE start!
FAIL(auth)

succeed: 0 / failed: 1

from xda-developers http://ift.tt/21mTDoJ
via IFTTT

want STOCK SYSTEM backup for Galaxy core 8262

I want system partition for restoring system
I have core 8262. once I tried to wipe SYSTEM partiton in TWRP (V 2.7.1.0.)
If anybody have system or tried to full backup in TWRP OR any other recovery please give me file.
I shown error of install apps.
Please needful

from xda-developers http://ift.tt/26Gax5M
via IFTTT

i9100 - Damaged USB port. Can i still root/TWRP?

Just got given an i9100 today with a faulty USB port. A new one is coming in the mail, but ebay is slow.
It charges fine so it can be used, just no data connection over USB (connects and disconnects, cleaning the port did not help)

Currently on 4.1.2, i9100XXLS9

I can get files to it via SD card, is there any methods to root it or get TWRP on it that can be done before i fix the USB port?

from xda-developers http://ift.tt/21mTBxf
via IFTTT

[Note 5 Port][5.1.1][04/30/16][G900V] NORMA v3.2 Final | fast| unique| mods]

This Is Important:
This is an aroma installer so you must use TWRP or Flashfire V31 and above. You will have the option in aroma installer to choose your type of install, Locked Bootloaders or Unlocked Bootloaders. The LockScreen will work on both locked and unlocked bootloaders. If you do not have unlocked bootloaders then do not wipe the dalvik cache or you will get Sytem UI FC. If you want to run xposed on locked bootloader you will have to disable stock lockscreen by setting lockscreen type to none. Then you will have to download a third part lockscreen app. Do this before you install xposed or wipe the dalvik cache. Stock MMS requires some mods to get working. Hangouts MMS works fine.

Original base N5 firmware
Port files taken from N5 Firmware:N9200ZCU2APA1
- N5 Apps/Libs-N9200ZCU2APA1
- Multi-languag
- Full QMG/SPR/BMP support
-

- Alpha and Faster
- Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
- Hispasian kernel Default, init.d and battery tweak
- Aroma with some Options

ROM Features
- N5 Accuweather
- N5 TouchWiz Home with Themes Support
- N5 Message App with floating message support
- N5 Settings With All S6 Lockscreen Effect
- N5 Keyboard
- N5 Health
- N5 Smart Manager
- N5 Gallery
- N5 Photo Editor
- N5 Email
- N5 Dialer and Contacts
- N3 Camera
- N5 SystemUI
- N5 My Files
- N5 Music With N5 Equalizer
- N5 Calculator
- N5 Calendar
- N5 Galaxy Apps
- N5 WallpaperPicker
- N5 S Browser
- N5 Smart Remote
- N5 Clock
- N5 S-PEN
- N5 Video App
- N5 Memo & SNOTE
- N5 Voice Recorder
- N5 S Voice
- N5 Theme Store
- N5 Theme Center
Advanced Power Menu
- More!!

1.. Rom Control integrated. Change functions like clock, battery, network signal, 2.launcher animation control, long click to kill, status bar colour, toolbox and many, many, many more.
3. Infinite launcher scrolling - thanks Also a huge thanks to the team for allowing us to use some of their files for last release
4. Smooth as butter. You will never find a smother rom
5. Moded SMS app. You get the original timestamp and you could write a very very long text without the fear of your carrier charging you.
6. Many setting item available as a separate settings menu. E.g. Autostart, reading mode, side key panel etc
7. Different level of animation made available for selection. 0, 0.25, to 1.0
8. Beautiful frames
6. Recent menu rounded for beautification
8. Sound control from power menu
9.speed meter left or right
10-battery choise 3minit or stock
11. CHANGE DPI
USSD works out of the box
12. All toggles enabled...more than you will ever need
13. High volume warning disabled
14. Data toggle warning disabled
15. Play with system files as you ever want...framework properly patched
16. Latest apps, google search, Play Store and many more
17. Ability to completely remove all google services and app and restore with a single click. NORMAsettings for more customisation
18. Stagefright Vulnerability
19. added launcher icon for easy access
added RAM Cleaner
added Launcher transition animations
added Hide apps from launcher
added sound options - enable/disable some system sounds
removed AdAway icon
added DPI changer - changes DPI right away
added Device Name Changer (build.prop device)
added Build.prop editor for advanced users
################################################## ########################
HOW TO FLASH TWRP UNLOCKED BOOTLOADERS
Download the Rom from Download Link & put it on your device.
1..Boot to recovery and choose (for TWRP): Wipe --> Advanced Wipe --> Dalvik, System, Data and Cache. Then Swipe.
2..Now choose Install and search where you put the Rom.
3..Tap on it and swipe. Choose Unlocked Bootloader in aroma installer Wait until it install the Rom.
4..Reboot and wait that it complete the first boot: It takes around 12 minutes!
5..Enjoy the Rom.
################################################## ########################
HOW TO FLASH FLASHFIRE LOCKED BOOTLOADERS
Download the Rom from Download Link & put it on your device.
1..Open FlashFire Choose Add Flash Zip or OTA
2..Now choose Install and search where you put the Rom.
3..Tap on it. Leave default box checked to mount system click the ok check mark at top
4..Now Add A wipe and wipe system, 3rd party apps, Dalvik Cache, and Cache Partition
5..Now move the wipe box by holding down on it and move it above the Flash Zip or OTA Box. THIS IS VERY IMPORTANT THE WIPE MUST BE DONE BEFORE THE ROM IS FLASHED OR YOU WILL GET SYSTEMUI FC!!!
6..Now choose locked bootloader in aroma installer.
################################################## ###########################

If you like the rom and want to support all the work that the dev has done with it, please make a donation!



################################################## ###########################

DOWNLOADS

Norma_Note5Port_V3.2_VZW.zip

################################################## ###########################
################################################## ###########################

ORIGINAL THREAD HERE

XDA:DevDB Information
ROM[Norma v3.1 G900X], ROM for the Samsung Galaxy S 5

Special Thanks

Contributors
nunofgrd, wellaflex, komarov27,Malbert16442
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: TW

Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2016-04-14
Created 2016-04-14
Last Updated 2016-04-14

from xda-developers http://ift.tt/26Gaqr1
via IFTTT

Witch phone best for Fifa16 Ultimate Team

Hello,

Fifa 16 UT:
Minimum requirements: 1.5 GB RAM, A9 Cortex 1.6 GHz Quad-core CPU or 1.7 GHz Dual-core Krait CPU, Adreno 305 GPU (or equivalent)

Lenovo A850+ with octa core Cpu @ 1.4ghz and only 1gb ram and Mali-450MP4 gpu?
or
HTC Desire 526 with Quad core cpu 1.1ghz and 1.5gb ram and adreno 304 gpu?

I dont really know how the Adreno 304 and Mali 450 compare , but the adreno is just 1 step below min requiment. And would the superior CPU make up for the lack of ram?

Thanks.

from xda-developers http://ift.tt/26Gap6m
via IFTTT

2nd sim battery usage

Hi...Does anyone know roughly how much battery is consumed by the phone for having a 2nd sim being connected to a gsm network?

I don't mean battery consumption based on usage, just the 2nd sim 'staying on and connected' part

from xda-developers http://ift.tt/1VFN0yf
via IFTTT

Dump contents of entire device (partitions), then convert to KDZ/TOT firmware image?

I have the LG v10 from T-Mobile. I bought the phone a few weeks ago and it had Marshmallow installed. Somehow I managed to install TWRP/SuperSU, but then had issues and flashed the official/stock MM image with LGUP. Afterwards I discovered that MM for this device is not currently rootable, and TWRP cant be flashed via fastboot because MM blocks it. So I returned the device to T-Mo store, lied and said it force-upgrade to MM and had began freezing up. They did an in-store trade for an identical model that had 5.1.1 Lollipop.

The device is currently still in factory condition in every way, with the exceptions that I unlocked the bootloader via fastboot and installed TWRP. Nothing else is modified yet and no custom ROMs have been flashed.

I recently became aware that there is no stock LP image for the T-Mo v10, only MM images are available. After all the issues I've had, I'm now paranoid and want to have a complete dump of the phone's entire contents (partitions, bootloader, system, etc) that is in KDZ or TOT format, and can be reflashed with the standard tools available. Since there is nothing official then I would have to do this myself. This would be useful in the event that I run into lots of issues and need to do a emergency stock restore.

I found a thread by XDA user @tungkick, in which he created a modified dump of the device while it was running LP. However, because it was unofficial and he didn't disclose this upfront, his thread was shut down. His file bricked multiple MM users. I assume it would work if one was still on LP and hadn't upgraded to MM. Not to mention that I cant seem to find his file anywhere. So I figure the safest way is to do this myself. I would be willing to make this file available to the community when finished, with full disclosure that it is unofficial. But the problem is, I don't know how.

I know that the Linux dd command can be used to dump images of various things, and I have read that this can be done on PC by connecting to the device via ADB or fastboot. This would hopefully result in an image file that contained the contents of all the device's partitions.

But another issue would be converting it to KDZ or TOT. And it would have to be done in such a way that it would be flashable with the standard tools.

Can someone please give me a technical understanding of the tools and knowledge I would need to undertake this? Would it be too complicated for someone like myself that has little Android/Linux experience (but is generally competent with computers/technology)?

Thanks for any advice!

from xda-developers http://ift.tt/1SSnMci
via IFTTT

Strange wifi issue in new mm update

I recently came back from Dr ketan mm build 3 to stock rom 6.0.1 for n910g iju so for new may patch in setting under development section I am seeing new option for networking as shown in screens hots.
When I got back suddenly my wifi behaving strange sometimes it works sometimes it doesn't .I don't know why.before coming back to stock I wiped all data and cache everything.i don't know may be it's bcs of this new setting or what?has anyone else experienced this problem?


Sent from my SM-N910G using Tapatalk

from xda-developers http://ift.tt/1SSnKB6
via IFTTT

Red Meat Man(Super Meat Boy inspired) Game out now for Android

Play as Red Meat Man is this crazy platformer arcade game. Dodge buzz-saws, avoid spikes and jump over pitfalls!! Plus Red Meat Man talks and says hilarious stuff thought the game. Red Meat Man brings back the classic arcade style games with fun levels and killer challenges. We promise once you pick this game up, you won't be putting it down.And its Free!!

Amazon Appstore
http://ift.tt/1VFN0hB

Download From Zippyshare
http://ift.tt/26GcLSA

Attached Thumbnails

   

from xda-developers http://ift.tt/1SSnJNN
via IFTTT

Portable Storage

I do not have root,but I was able to get portable storage. I was just tinkering around and went ahead and clicked format. It then told me that it format to portable storage. It's weird,because I can't use ES File Pro,but I can use stock file manager to move files to my micro SD. I do not have root(Sprint Phone),nor did I use ADB. You can see proof in screenshots below.

Attached Thumbnails

       

from xda-developers http://ift.tt/1VFMXlW
via IFTTT

Help plzz..

Whenever I try to flash anything or do anything like wipe or backup using twrp 2.8, the phone got restart automatically between the process without doing the task Complete...

from xda-developers http://ift.tt/1SSnG4s
via IFTTT

Can't turn on wifi & bluetooth!

Help me i can't turn on wifi neither bluetooth.
It's on stock & unrooted.

from xda-developers http://ift.tt/1VFMWP8
via IFTTT

Random vibrations?

T-Mobile Galaxy S7 here. There are times when I'm using the phone and it suddenly vibrates, as if receiving a notification. The thing is, there is no notification being received. I've already checked the most probable causes: Notification Reminder in Accessibility and Smart Alert under Advanced Features. Both are off. I'm at a loss and the random vibrations get annoying.

Sent from my SM-G930T using Tapatalk

from xda-developers http://ift.tt/1rJe2sd
via IFTTT

Recover data from SD card which is present as internal in Android 6.0

Hi all,
I'm having lenovo k3 note with marshmallow update.
It features to convert external memory card to internal & I did so. I used migrate option in settings-->storage. But it copied lot of data to device storage, hence it end up in low memory space & I can't use my mobile. So I formatted mobile. But now it asks me to format my memory card, which is having lot of important datas. Even this memory card is not recognizing in laptop. It only allows to format to portable or internal storage in my mobile.Please suggest me to recover my datas. Thanks in advance!!!

from xda-developers http://ift.tt/21mPAZI
via IFTTT

Speed up your rooted mate 7

Afternoon all now firstly this is not an add Ian in no way affiliated.
I tried out a program call L Speed found on the play store and after applying some settings my phone feels new again very snappy, antutus 3d section has never worked for me but after using this program it now works, don't know why but it does. Give it a try and see what you think.
Cheers
John

Sent from my JAZZ using Tapatalk

from xda-developers http://ift.tt/1rJe17V
via IFTTT

Problem flashing xposed framework for lenovo a6000 plus android v5.0.2 lollipop

Mr. developer good day to you. Sir i have a problem. Coz according to cpu-z app my lenovo a6000 plus running on lollipop 5.0.2 has api: 21 and kernel architecture: aarch64 which is not listed here. So I downloaded arm64 which doesn't worked. So please help me sir how to flash with a correct zip file in your page. I am a big fan of you project. Thanks.

from xda-developers http://ift.tt/21mPyBd
via IFTTT

S7 frp ! Finally

Is your s7 got stuck on frp? Now someone finally figure it out
It was rootjunky ! You can follow this step in this video

https://m.youtube.com/watch?v=ChCvMLdyRuw

EDIT : if you dont have the t-mobile variant, you wont have the "upgrade data service plan" option, so you have to entery battery instead of data usage , then select "change power saving location method", select google location history, them select help, now youre in chrome. Then follow like in the video

GOOD LUCK !

All credit goes to him

from xda-developers http://ift.tt/1rJe03D
via IFTTT

How to Disable system write protection.

my device is S-on
In android 5.0.2, i use http://ift.tt/1fxwbme, and i succecful
But in android 6.0.1, not succcecful, help me.

from xda-developers http://ift.tt/21mPv8s
via IFTTT

I need help

I need someone to make a root app that allows you to change your power button to a different one and that allows to turn phone off and on because I broke my power button and I can only turn phone on if I plug charger in take battery out and put it back in and unplug..

from xda-developers http://ift.tt/1SSkXI9
via IFTTT

[TOOL] SRK Tool Huawei

Hi all,

I'm from Thailand. I made SRK Tool for LG G2 and G3[TOOL] SRK Tool 2.1 [ROOT/UNBRICK/UTILITY/BACKUP]- 20150507 and now I'm a new user for Huawei forum. I'm planing to develop my SRK Tool for Huawei phone, and this is a first look:D


Beta 01 - 20160429
- initial version
- Unlock bootloader
- Relock bootloader
- Utility
1. Exit FASTBOOT AND RESCUE MODE
2. Reboot to Recovery
3. Reboot to Bootloader

Download link :

Beta 01 - 20160429
SRKToolHuawei-beta-01_20160429.zip: http://ift.tt/1O5615e

XDA:DevDB Information
SRK Tool Huawei, Tool/Utility for the Huawei Mate 8

Contributors
somboons

Version Information
Status: Beta
Current Beta Version: 01
Beta Release Date: 2016-04-29

Created 2016-05-01
Last Updated 2016-04-30

from xda-developers http://ift.tt/24edLP3
via IFTTT

RRO/Layers compatible Stable ROM for N9005?

Hi there.
I'm on the outlook for a STABLE rro/layers compatible ROM for my N9005.

I've been using Touchwiz derivative ROMs for some time (such as DarkLord's S6/N5), as they tend to be really stable, and I find that the battery life is excellent (2 days).

I've been steering away from AOSP (etc) ROMs for some time, due to what - from my experience - is a great deal of instability (random reboots, frequently), and very poor battery life for the same usage (a recharge ESSENTIAL at the end of every day).

However, no matter how I dress the Samsung up (Nova launcher, Samsung material theme, Flat bars xposed extension), I never really can get it looking how I desire: I'd really like to get it looking very clean and dark clean and light)
'
So, can people suggest rro/layers compatible ROMs that are foremost stable and with excellent battery life?

Cheers
M

P.S. I have updated my modem to the latest Samsung firmware

from xda-developers http://ift.tt/1SSkWnG
via IFTTT

Shield Tablet + DisplayLink Monitor eg ASUS MB169B+ - any pitfalls here?

I'm considering getting an ASUS MB169B+ portable monitor to use with my Shield Tablet. This monitor has only USB DisplayLink as an input.

I know this works with an Android + USB OTG Y splitter + power bank battery for monitor power source as per this thread here using an Xperia Z5:

http://ift.tt/1NKN2Cj

The Android device requires an app to output to DisplayLink and will also be stuck in landscape unless you manually change it.

Has anyone done this with an Nvidia Shield Tablet & can you think of any pitfalls I might encounter along the way if I tried this with our device?

Cheers!

from xda-developers http://ift.tt/1r7wcmJ
via IFTTT

[STOCK][M] H850 10C OPEN EU KDZ + Flashable ZIPs + All IMGs

Quote:

LG-H850 OPEN EU 10C This thread provides a stock H850 OPEN EU 10C TWRP-flashable update for 10C as well as the 10C KDZ and all IMGs. Information: 10C is the first update from version 10A for the LG G5 H850. Android Version: 6.0.1 Android security patch level: 2016-04-01 Baseband version: MPSS.TH.2.0.c1.4-00014-M8996FAAAANAZM-1.45732.6.48263.2 Kernel version: 3.18.20 Build number: MMB29M Software version H85010c Stock 10C build.prop : # begin build properties # autogenerated by buildinfo.sh ro.build.id=MMB29M ro.build.display.id=MMB29M ro.build.version.incremental=161061354b2cf ro.build.version.sdk=23 ro.build.version.preview_sdk=0 ro.build.version.codename=REL ro.build.version.all_codenames=MNC,REL ro.build.version.release=6.0.1 ro.build.version.security_patch=2016-04-01 ro.build.version.base_os= ro.build.date=Fri Apr 15 14:00:27 KST 2016 ro.build.date.utc=1460696427 ro.build.type=user ro.build.user=jenkins ro.build.host=LGEACI5R11 ro.build.tags=release-keys ro.build.flavor=h1_global_com-user ro.product.model=LG-H850 ro.product.brand=lge ro.product.name=h1_global_com ro.product.device=h1 ro.product.board=msm8996 # ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete, # use ro.product.cpu.abilist instead. ro.product.cpu.abi=arm64-v8a ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi ro.product.cpu.abilist32=armeabi-v7a,armeabi ro.product.cpu.abilist64=arm64-v8a ro.product.manufacturer=LGE ro.product.locale=en-GB ro.wifi.channels= ro.board.platform=msm8996 # ro.build.product is obsolete; use ro.product.device ro.build.product=h1 # Do not try to parse description, fingerprint, or thumbprint ro.build.description=h1_global_com-user 6.0.1 MMB29M 161061354b2cf release-keys ro.build.fingerprint=lge/h1_global_com/h1:6.0.1/MMB29M/161061354b2cf:user/release-keys ro.build.characteristics=default ro.lge.lguiversion=5.0 # end build properties # # from device/qcom/msm8996/system.prop # # # system.prop for msm8996 # #rild.libpath=/system/lib/libreference-ril.so rild.libpath=/vendor/lib64/libril-qc-qmi-1.so #rild.libargs=-d /dev/smd0 persist.rild.nitz_plmn= persist.rild.nitz_long_ons_0= persist.rild.nitz_long_ons_1= persist.rild.nitz_long_ons_2= persist.rild.nitz_long_ons_3= persist.rild.nitz_short_ons_0= persist.rild.nitz_short_ons_1= persist.rild.nitz_short_ons_2= persist.rild.nitz_short_ons_3= ril.subscription.types=NV,RUIM DEVICE_PROVISIONED=1 # Start in cdma mode # TODO: Please DO NOT enable the next line when you merge CAF #ro.telephony.default_network=10 debug.sf.hw=1 debug.egl.hw=1 debug.gralloc.enable_fb_ubwc=1 dalvik.vm.heapsize=36m dev.pm.dyn_samplingrate=1 persist.demo.hdmirotationlock=false #ro.hdmi.enable=true persist.speaker.prot.enable=true qcom.hw.aac.encoder=true # # system props for the cne module # persist.cne.feature=1 #For enable Android XLAT, LGE does not use this property #system prop for enabling/disabling Android XLAT #persist.net.doxlat=true #For enable Android XLAT, LGE does not use this property #system props for the MM modules media.stagefright.enable-player=true media.stagefright.enable-http=true media.stagefright.enable-aac=true media.stagefright.enable-qcp=true media.stagefright.enable-fma2dp=true media.stagefright.enable-scan=true mmp.enable.3g2=true media.aac_51_output_enabled=true # Enable adaptive playback for secure decoder mm.enable.sec.smoothstreaming=true av.debug.disable.pers.cache=true #185971 is decimal sum of supported parsers in AAL #37491 is decimal sum of supported codecs in AAL #codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE mm.enable.qcom_parser=1048575 persist.mm.enable.prefetch=true # Additional i/p buffer in case of encoder DCVS vidc.enc.dcvs.extra-buff-count=2 # Set default power mode to low power for encoder vidc.debug.perf.mode=2 # # system props for the data modules # ro.use_data_netmgrd=true persist.data.netmgrd.qos.enable=true persist.data.mode=concurrent #system props for time-services persist.timed.enable=true # # system prop for opengles version # # 196608 is decimal for 0x30000 to report version 3.0 # 196609 is decimal for 0x30001 to report version 3.1 ro.opengles.version=196609 # system property for maximum number of HFP client connections bt.max.hfpclient.connections=1 # System property for cabl #disable cabl for h1 #ro.qualcomm.cabl=2 ro.qualcomm.cabl=0 # # System props for telephony # System prop to turn on CdmaLTEPhone always # TODO: Please DO NOT enable the next line when you merge CAF #telephony.lteOnCdmaDevice=1 #Simulate sdcard on /data/media # persist.fuse_sdcard=true #system prop for Bluetooth SOC type qcom.bluetooth.soc=rome #system prop for wipower support ro.bluetooth.wipower=true #Set this true as ROME which is programmed #as embedded wipower mode by deafult ro.bluetooth.emb_wp_mode=true # #snapdragon value add features # ro.qc.sdk.audio.ssr=false persist.audio.ssr.3mic=false ##fluencetype can be "fluence" or "fluencepro" or "none" #ro.qc.sdk.audio.fluencetype move to model/audio_config.mk #ro.qc.sdk.audio.fluencetype=none persist.audio.fluence.voicecall=true persist.audio.fluence.voicerec=false persist.audio.fluence.speaker=true #system prop for RmNet Data persist.rmnet.data.enable=true persist.data.wda.enable=true persist.data.df.dl_mode=5 persist.data.df.ul_mode=5 persist.data.df.agg.dl_pkt=10 persist.data.df.agg.dl_size=4096 persist.data.df.mux_count=8 persist.data.df.iwlan_mux=9 persist.data.df.dev_name=rmnet_usb0 #property to enable user to access Google WFD settings persist.debug.wfd.enable=1 ##property to choose between virtual/external wfd display persist.sys.wfd.virtual=0 #property to enable sde downscale feature for external display #sdm.debug.downscale_external=1 #property to specify the number of frames to skip before setting hint sdm.perf_hint_window=50 #disable tunnel encoding tunnel.audio.encode=false #Buffer size in kbytes for compress offload playback audio.offload.buffer.size.kb=32 #Enable offload audio video playback by default #audio.offload.video=true #Enable 16 bit PCM offload by default #audio.offload.pcm.16bit.enable=true #Enable 24 bit PCM offload by default audio.offload.pcm.24bit.enable=true #Enable audio track offload by default audio.offload.track.enable=true #Enable music through deep buffer audio.deep_buffer.media=true #enable voice path for PCM VoIP by default #use.voice.path.for.pcm.voip move to model/audio_config.mk #use.voice.path.for.pcm.voip=true #Enable multi channel aac through offload audio.offload.multiaac.enable=true # system prop for NFC DT ro.nfc.port=I2C #enable dsp gapless mode by default #move to model property setting #audio.offload.gapless.enabled=true #enable pbe effects audio.safx.pbe.enabled=true #parser input buffer size(256kb) in byte stream mode audio.parser.ip.buffer.size=262144 #property to enable WFD WL solution ro.vendor.wl_library=libqti-wl.so #property for vendor specific library ro.vendor.gt_library=libqti-gt.so ro.vendor.at_library=libqti-at.so sys.games.gt.prof=1 #hwui properties ro.hwui.texture_cache_size=72 ro.hwui.layer_cache_size=48 ro.hwui.r_buffer_cache_size=8 ro.hwui.path_cache_size=32 ro.hwui.gradient_cache_size=1 ro.hwui.drop_shadow_cache_size=6 ro.hwui.texture_cache_flushrate=0.4 ro.hwui.text_small_cache_width=1024 ro.hwui.text_small_cache_height=1024 ro.hwui.text_large_cache_width=2048 ro.hwui.text_large_cache_height=1024 #Disable property for Dolby ds2 audio.dolby.ds2.enabled=false #Disable property for hard bypass audio.dolby.ds2.hardbypass=false audio.offload.passthrough=false #move to model property setting #Enable multi offload by defaul #audio.offload.multiple.enabled=false # enable navigation bar qemu.hw.mainkeys=0 #property to enable VDS WFD solution persist.hwc.enable_vds=1 #Enable stm events ro.dbg.coresight.config=stm_events #property to enable fingerprint persist.qfp=false #default pd_enable value persist.sys.pd_enable=0 #Disable rotator split feature sdm.debug.disable_rotator_split=1 #Increase cached app limit #ro.sys.fw.bg_apps_limit=60 # property for oom values ro.sys.fw.bg_cached_ratio=0.33 ro.sys.fw.mOomAdj1=0 ro.sys.fw.mOomAdj2=1 ro.sys.fw.mOomAdj3=2 ro.sys.fw.mOomAdj4=3 ro.sys.fw.mOomAdj5=9 ro.sys.fw.mOomAdj6=15 ro.sys.fw.mOomMinFree1=73728 ro.sys.fw.mOomMinFree2=92160 ro.sys.fw.mOomMinFree3=110592 ro.sys.fw.mOomMinFree4=129024 ro.sys.fw.mOomMinFree5=225000 ro.sys.fw.mOomMinFree6=325000 # reserved wifi related property dhcp.ap.macaddress= dhcp.wlan0.dns1= dhcp.wlan0.dns2= dhcp.wlan0.domain= dhcp.wlan0.gateway= dhcp.wlan0.ipaddress= dhcp.wlan0.leasetime= dhcp.wlan0.mask= dhcp.wlan0.pid= dhcp.wlan0.reason= dhcp.wlan0.result= dhcp.wlan0.server= dhcp.wlan0.vendorInfo= dhcp.p2p.dns1= dhcp.p2p.gateway= dhcp.p2p.ipaddress= dhcp.p2p.leasetime= dhcp.p2p.mask= dhcp.p2p.pid= dhcp.p2p.reason= dhcp.p2p.result= dhcp.p2p.server= dhcp.p2p.vendorInfo= init.svc.dhcpcd_wlan0= init.svc.dhcpcd_p2p= init.svc.p2p_supplicant= init.svc.wififtmd= init.svc.iprenew_wlan0= net.change= net.dns1= net.dns2= wlan.driver.status= # # ADDITIONAL_BUILD_PROPERTIES # log.tag.GpsLocationProvider=DEBUG log.tag.LocationManagerService=DEBUG log.tag.NlpProxy=DEBUG log.tag.LocSvc_java=DEBUG log.tag.LgeGpsIndicator=DEBUG log.tag.GeofenceHardwareImpl=DEBUG log.tag.GeofenceManager=DEBUG log.tag.FlpServiceProvider=DEBUG log.tag.GeofenceProxy=DEBUG ro.com.lge.mada=gms_3.1 ro.build.target_operator=GLOBAL ro.build.target_country=COM ro.telephony.default_network=9 telephony.lteOnCdmaDevice=0 ro.lge.lcd_default_brightness=156 persist.service.bdroid.sap=true service.bt.support.busytone=true persist.sys.cust.lte_config=true ro.lge.hw.revision_fixed=true ro.sys.fw.bg_apps_limit=32 ro.config.max_starting_bg=16 persist.http.gba.auth=false persist.gsm.sms.disablelog=64 ro.lge.ns.default=1 persist.audio.nsenabled=ON lge.fm_gain_control_headset=1.3 lge.fm_gain_control_speaker=3.5 ro.config.ringtone=00_Life_Is_Good.ogg lge.normalizer.param=version2.0/false/13/true/8000/1/3000/0.5 ro.com.google.gmsversion=6.0_r2 ro.setupwizard.mode=DISABLED ro.com.google.apphider=on lge.nfc.vendor=nxp ro.sf.lcd_density=640 persist.sys.strictmode.disable=true ro.config.vibrate_type=1 persist.service.crash.enable=0 persist.sys.ssr.restart_level=ALL_ENABLE ro.lge.adoptable_storage=false ro.frp.pst=/dev/block/bootdevice/by-name/persistent ro.lge.hl_mode=1 ro.camera.notify_nfc=1 ro.camera.fake_camera_id=2 persist.debug.sensors.hal=i debug.qualcomm.sns.daemon=i debug.qualcomm.sns.libsensor1=e persist.sensors.mag_filter_size=8 persist.sensors.knock_delay=1000 persist.sensors.wul_multilevel=3 persist.sensors.wul_thresh0=2 persist.sensors.wul_thresh1=10 persist.sensors.wul_thresh2=15 persist.sensors.wul_delay=3000 persist.sensors.onhand.en=0 persist.fp.show_percent=false persist.radio.apm_sim_not_pwdn=1 persist.audio.voice.clarity=off persist.audio.handset_rx_type=DEFAULT ro.qc.sdk.audio.fluencetype=nxp ro.config.vc_call_vol_steps=7 ro.config.vc_call_vol_default=4 audio.offload.24bit.enable=1 audio.offload.pcm.enable=true persist.spkr.cal.duration=0 persist.audio.dual_audio=ON persist.audio.twin_headset=DISABLE persist.audio.twin_headset_on=0 ro.config.media_vol_extend=ON ro.lge.vib_magnitude_index=0,1044,1276,1508,1740,1 856,1972,2088 use.voice.path.for.pcm.voip=false ro.config.notification_sound=Crystal.ogg ro.config.alarm_alert=Life_Is_Good_Alarm.ogg ro.config.timer_alert=Timer.ogg audio.offload.gapless.enabled=true audio.offload.multiple.enabled=true audio.offload.video=false audio.offload.pcm.16bit.enable=false ro.lge.noise.suppression=1 ro.lge.voice.clarity=1 ro.airplane.phoneapp=1 media.input.fd.disable=true ro.lge.build.basetag=LAMPMMR1R160215 ro.lge.build.branch=msm8996_m_mr1_h1_global_com_mp _160218 sys.knockon.knockoff.distance=10 ro.lge.lcd_auto_brightness_mode=false ro.lge.audio_soundexception=true sys.lge.bnrd=0 com.lge.splink_screen_off=0 ro.lge.capp_cupss.rootdir=/cust ro.build.sbp=1 ro.lge.singleca.enable=1 ro.lge.custLanguageSet=true ro.lge.revshare=2015 persist.data.sbp.update=0 sbp.oppartition.rw=0 ro.lge.sbp.opresize=50 ro.lge.sbp.opresizeratio=50 ro.lge.sbp.opresize_enabled=1 ro.lge.capp_ZDi_O=true lge.zdi.actionsend=false lge.zdi.onactivityresult=true lge.zdi.dragdropintent=false drm.service.enabled=true ro.lge.capp_emotional_led=true wlan.lge.wifidisplay=both lge.signed_image=true persist.service.main.enable=0 persist.service.system.enable=0 persist.service.radio.enable=0 persist.service.events.enable=0 persist.service.kernel.enable=0 persist.service.packet.enable=0 persist.service.storage.low=0 persist.service.power.enable=0 persist.service.memory.enable=0 persist.service.ccaudit.enable=0 persist.service.xfrm.enable=0 persist.lg.data.llkklk=true persist.dpm.feature=0 persist.telephony.oosisdc=false persist.lg.data.fd=-1 persist.qcril.disable_retry=true persist.lg.data.llkklk.exact=true persist.lg.data.fds_prop=0 ro.lge.swversion_arb= ro.lge.swversion=H85010c ro.lge.swversion_short=V10c ro.lge.swversion_rev=0 ro.lge.factoryversion=LGH850AT-00-V10c-GLOBAL-COM-APR-15-2016+0 dalvik.vm.heapgrowthlimit=256m ro.vendor.extension_library=libqti-perfd-client.so persist.radio.sib16_support=1 persist.radio.custom_ecc=1 af.fast_track_multiplier=1 audio_hal.period_size=192 camera.disable_zsl_mode=1 ro.carrier=unknown dalvik.vm.heapstartsize=8m dalvik.vm.heapsize=512m dalvik.vm.heaptargetutilization=0.25 dalvik.vm.heapminfree=4m dalvik.vm.heapmaxfree=16m persist.service.odm_log.noti=true persist.service.odm_log.svc=true ro.boot.svelte=1 ro.qcom.ad=1 ro.qcom.ad.sensortype=1 ro.qcom.ad.calib.data=/system/media/display/calib.cfg persist.sys.highlux.menu_on=0 persist.sys.enable_hardreset=0 ro.lge.has_left_sidekey=true vr.perfd.controller.start=0 ro.lge.gons.enable=true wlan.lge.gons.scan.completed=false wlan.lge.gons.scan.scanonly=false persist.service.logger.low=0 wlan.chip.vendor=brcm wifi.lge.patch=true wlan.lge.concurrency=MCC wlan.lge.supportsimaka=yes wlan.lge.softapwps=true wifi.lge.common_hotspot=true wifi.lge.supportp2p5g=full wlan.lge.traffic.trigger=100 wlan.lge.fastroaming=true wlan.chip.version=bcm43455 wlan.lge.dcf.enable=true wlan.lge.passpoint_setting=true bluetooth.fm.restorecon=0 ro.dev.fmode=0 ro.dev.fmode_exif=0 persist.sys.dalvik.vm.lib.2=libart dalvik.vm.isa.arm64.variant=kryo dalvik.vm.isa.arm64.features=default dalvik.vm.isa.arm.variant=cortex-a53 dalvik.vm.isa.arm.features=default net.bt.name=Android dalvik.vm.stack-trace-file=/data/anr/traces.txt persist.gps.qc_nlp_in_use=1 persist.loc.nlp_name=com.qualcomm.location ro.gps.agps_provider=1 ro.expect.recovery_id=0x5172a68d82ce4defc50c0d0ba9 76bc60777e093d000000000000000000000000 Requirements: To flash the 10C ZIPs you must have TWRP 3.0.2 or higher. And, of course, you must have your bootloader unlocked for TWRP to work. Currently only H850 EU variants have official unlock. Please do not ask if "model x" is supported... did you unlock via LG's official unlock tool? Yes? then you can use the zip. No?.. then you should skip the ZIPs and just flash the KDZ instead. Install Directions: These directions should be used by everyone who wants a rooted 10C system. Don't want root? Then it's probably easiest to just flash the stock KDZ using LGUP or LG Bridge... or just skip the SuperSu steps. There are currently NO confirmed 100% safe/working methods to manually flash KDZ/TOT files to the G5. LGUP may work if you add the H850 info into the Windows Registry... but it also may brick you. Until someone is brave enough to try and confirm the only way to flash a KDZ is the official route with LG Bridge but many of you many not have 10C available. So the only route is if you are unlocked and flash the ZIPs in TWRP or have 10C or higher available in LG Bridge. I will update this spot when something new is confirmed. 1. Download the following two files and place them on your phones internal or external SD card (best to use external if you want to keep data encrypted) A. LG-H85010C-Flashable.COMPLETE.zip B. Also download the latest SuperSU 2.65 or higher. [STABLE] or [BETA] Thanks to Chainfire! 2. (re)Boot into TWRP if not there already. 3.* Backup current partitions: boot, system, data, efs (backing up anything is optional but suggested) 4.* Up to you if you want to wipe data (TWRP > Wipe > Swipe slider) but not needed if coming from stock 10A, 10B or 10C. 5. Install the two zip files you put on your sdcard, 1 at a time: A. LG-H85010C-Flashable.COMPLETE.zip (Install > select zip > swipe to confirm/flash) B. SuperSU zip (Install > select zip > swipe to confirm/flash) After zips finish flashing you can reboot! If TWRP asks if you want to install SU, hit no. If TWRP says No OS installed, ignore it. Downloads: Please do not mirror files! LG-H85010C-Flashable.COMPLETE.zip 100% stock untouched system, boot, modem and bootloader. LG-H85010C-Flashable.Modem.zip This is a flashable stock 10C modem. LG-H85010C-Flashable.Boot.zip This is a flashable stock 10C boot.img. Boot.img contains kernel + dtb + ramdisk. LG-H85010C-Flashable.Bootloader.zip This is a flashable stock 10C bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz. Also, KDZ + all stock images for 10C are available in the link below... CODEFIRE DIRECTORY MD5 Sums: Click button below to view MD5 for each file... MD5 (aboot.img) = a0245f12ecbc0b94b663112a24aa1f34 MD5 (apdp.img) = f74d23f22f37e1be3979bc7ce88eca6e MD5 (boot.img) = 35e7f98c7d998f2f891945a15d4e9295 MD5 (cmnlib.img) = fbd2784aae98033be27eee16807bd504 MD5 (cmnlib64.img) = 32a9487ffbee4bedccd88e7b4e471db4 MD5 (cust.img) = d61d8db37d60ea1db4f6406ccd9a417f MD5 (devcfg.img) = 99841d620805b09247782b333dafe228 MD5 (factory.img) = 15bc82584049ec3a7c62d921c2897267 MD5 (hyp.img) = 3078e017f130ad65acdb3e01fb62f5e9 MD5 (keymaster.img) = f53a3d3200829a0d550eeb9103d8fc3b MD5 (laf.img) = 2bd330dc03c8277e7c4d91ff75613b79 MD5 (modem.img) = 49cdfd04500f251047234956a638cf28 MD5 (msadp.img) = db86bd3e4538752559fd2e4ad9934587 MD5 (OP_OPEN_EU.img) = 81b984636745b61c4432340f93d237e5 MD5 (persist.img) = fe89cbd4d4ba8d59cc03c66ff9c57a74 MD5 (pmic.img) = 717679d130698d4ebec5897e95a42263 MD5 (raw_resources.img) = b6adf0702e21178df938bd641a07bca4 MD5 (rct.img) = 15bc82584049ec3a7c62d921c2897267 MD5 (recovery.img) = 7e41c4e404efa2d18d49c0c07dc40b42 MD5 (rpm.img) = 56499823596fadda38bf752b8f3fbc6b MD5 (sec.img) = 628756d1475c7e6ffa2f974c63261bf6 MD5 (system.img) = aadf8003e8c4ea51c1a2fc02eadfe23d MD5 (tz.img) = 6453a466b9ba912c8da60350a3f03944 MD5 (xbl.img) = db92c6f5942405eac5d717106f1767ad MD5 (xbl2.img) = db92c6f5942405eac5d717106f1767ad MD5 (LG-H85010C-Flashable.Boot.zip) = d6a457456b4509965a3659cf3fa194c3 MD5 (LG-H85010C-Flashable.Bootloader.zip) = 92b81b989be65bf755e2066a2c948825 MD5 (LG-H85010C-Flashable.COMPLETE.zip) = c4a1c7c6b51fe1788675e5ce00c2d070 MD5 (LG-H85010C-Flashable.Modem.zip) = 749c38f5e7eea52f1db20e1c6bbb6e32 Unofficial Bootloader Unlock: Don't have official bootloader unlock? This guy claims to have a working method HERE...

y u quote OP?

Follow me on twitter for future updates on LG-related things - http://twitter.com/@utoprime

Find this thread helpful? Hit the Thanks button!
Feeling extra generous? Click my name at the top of any post and hit donate or click here.

#TEAMCODEFIRE

from xda-developers http://ift.tt/1NKN2lG
via IFTTT

Microphone dont working, HELP ME, PLZ

Hello friends,
My HTC One M8 with root and android 6:01 Skydragon had problem at the door of micro usb and I switched it with a new one put then thou wilt give the non microphone work getting just a noise , however when I put on the speakerphone works well , I wonder if It is to leave only active speakerphone microphone ?

from xda-developers http://ift.tt/1r7w7ze
via IFTTT

[HELP] 4G/HSPA Icon Missing on Stock , But In Aosp is fine

Hi users Lg G3 ,

my icon signal like 4g or Hspa in Stock Rom is missing , But data still working , But in AOSP Rom 4g icon is fine and no problem ?

What Should I do ?? ,

POSITION Rom : Stock Marshmallow 6.0 ,


PLEASE HELP ME , Icon is important for me to check my signal status :rolleyes::rolleyes:

from xda-developers http://ift.tt/1NKMYlX
via IFTTT

How to flash xposed framework on lenovo a6000 plus w/ android v5.0.2 lollipop

Mr. developer good day to you. Sir i have a problem. Coz according to cpu-z app my lenovo a6000 plus running on lollipop 5.0.2 has api: 21 and kernel architecture: aarch64 which is not listed here. So I downloaded arm64 which doesn't worked. So please help me sir how to flash with a correct zip file in your page. I am a big fan of you project. Thanks.

from xda-developers http://ift.tt/1r7w5Yn
via IFTTT

Need access to a phone with a broken screen.

So, here is my situation. The screen is not working. The touch works, but the display is completely dead. I need to enter an 8 digit password to log in but cannot see what I am entering therefore it is difficult. I need a way to either control the phone from my computer or have the phone screen be displayed. I cannot turn on screen mirroring because I cannot see the screen on the phone. USB debugging is not available because, I CANNOT ENTER THE PASSWORD. I need a way to have the phone screen appear on my laptop or even on my TV. I do not know how, and anything I found online does not work for my situation. I cannot see my screen, that is literally all I want because the phone itself will not turn on. I can't even access the phone from my laptop because I cannot unlock it so that is out the window as well.

from xda-developers http://ift.tt/1NKMWdY
via IFTTT

Unable to find media locked by smartlock

I am unable to find the pics i locked using smartlock, process i followed was (photos - - selected media - - share via smartlock).

I checked .Smartlock folder in my phone storage but i could not find any files there.

Can anyone help me recover those files!?

from xda-developers http://ift.tt/1r7w4DN
via IFTTT

coolpad dazen1 network/wifi/ long time start problem

i have coolpad dazen1 model 8297l-100 having network problem & can't receive data over wifi. Also having problem of long time start during restarting/after power ON.
please help me out.

from xda-developers http://ift.tt/1NKMV9V
via IFTTT

Scrolling Wallpapers on S7 Edge (and S7 OG)

while I know that Samsung, unlike Moto and LG, lacks scrolling wallpapers ontheir default launcher, what launchers can I get that would allow for scrolling wallpapers? I have a G3 but am in the market for a new phone; but I like my QHD scrolling wallpapers and don't wanna give them up. Heck, I'm maybe only going back to Samsung because I hear the G5 is a disappointment and because its not waterproof like S7. tho USB type C does help the G5's case.

from xda-developers http://ift.tt/1O563u4
via IFTTT

Zenfone 2 failed update, can't flash stock firmware

I accidentally allowed the 2.20.40.183 OTA update, which rendered my phone useless. I tried putting MOFD_UPDATE of 2.20.40.174 on my SD card, but that didn't work.
Here's a few other things I tried:
Recovery menu: Updating phone, then dead droid. No menu appears.
adb sideload: adb didn't recognize my phone.
fastboot flash: Permission denied, or something along those lines. The write fails. Tried to flash system.img but it never did and nothing happened.
adb sideload through temporary CWM: Unauthorized device. Couldn't sideload.
Flashing through temporary CWM and temporary TWRP: Fails early on with Status 7. 2.20.40.174 is older, and this is apparently reason enough to deny me.

Does anyone have an idea about what I can do to fix this? Could I flash Cyanogenmod, then flash stock over that, using temporary CWM/TWRP?
My bootloader is not unlocked.

from xda-developers http://ift.tt/1X0QSJA
via IFTTT

Problem with tablet drive

Hello, I'm common problem on my PC when I turn on the tablet pc and appear "USB developer.
it will look to the drive and the error after some time.
Can anyone help me solve this?

from xda-developers http://ift.tt/1O5615m
via IFTTT

Note 3 Lags After updating to lollipop

i already reset the device factory reset but now i tried playing colorswitch and geometry dash some games it just lags milisecon delay wtf in kitkat there is no problem and lag like that

from xda-developers http://ift.tt/1X0QUkx
via IFTTT

[TOOL] SRK Tool Huawei

Hi all,

I'm from Thailand. I made SRK Tool for LG G2 and G3[TOOL] SRK Tool 2.1 [ROOT/UNBRICK/UTILITY/BACKUP]- 20150507 and now I'm a new user for Huawei forum. I'm planing to develop my SRK Tool for Huawei phone, and this is a first look:D


Beta 01 - 20160429
- initial version
- Unlock bootloader
- Relock bootloader
- Utility
1. Exit FASTBOOT AND RESCUE MODE
2. Reboot to Recovery
3. Reboot to Bootloader

Download link :

Beta 01 - 20160429
SRKToolHuawei-beta-01_20160429.zip: http://ift.tt/1O5615e

XDA:DevDB Information
SRK Tool Huawei, Tool/Utility for the Huawei Mate 8

Contributors
somboons, somboons

Version Information
Status: Beta
Current Beta Version: 01
Beta Release Date: 2016-04-29

Created 2016-05-01
Last Updated 2016-04-30

from xda-developers http://ift.tt/1O563tY
via IFTTT

Downgrade From Marshmallow To Lollipop

Howdy everyone!

I'm hoping someone will be able to provide some useful information or links to steer me in the right direction. Basically I have an HTC M9, and ever since I updated to Marshmallow, I've had nothing but problems. And when I was on Lollipop, I never experienced anything. What I would like to do is downgrade my HTC M9 from Marshmallow to Lollipop 5.1.1.

After doing a bit of Googling, it seems as though "downgrade" may not even be the correct term. I saw mention that what I need to do is flash the device with a 5.1.1 ROM. Anyway, apologies if my terminology is off.

I will say that my phone is completely stock. I've never done anything custom to it as I never really felt the need to. However I can't keep using this phone so long as it's on Marshmallow so I really want to downgrade. It is my understanding that there is no official way of downgrading?

A couple guides pointed me in the direction of using CyanogenMod 12.1 which I found a download for (cm-12.1-20150718-UNOFFICIAL-himaul), and also Google Apps 5.1 (gapps-5.1.x-20150324-minimal-edition-signed). I'm afraid I don't quite know what to do with them though.

But if anyone out there could help me out, it would be greatly appreciated. No hand holding needed, just a push in the right direction would be good enough! Thank you in advance.

from xda-developers http://ift.tt/1YZ0Jy6
via IFTTT

Samsung Galaxy Core Prime FRP Lock Help

Hello, i rooted my phone with kingroot and it ended up dieing. when i turned it back on i saw a screen saying Custom binary blocked by FRP and it says Secure Fail: kernel. i was wondering if anyone can help me fix this, i have the SM-G360T1 (MetroPCS) Version

Thanks If you can help

from xda-developers http://ift.tt/1WyHeNT
via IFTTT

Snapdragon camera v2

Can someone give me a working flashable snapdragon camera v2? I need to use it with custom rom... I have searched several threads an couldn't find working one..

Sent from my ONE A2003 using XDA-Developers mobile app

from xda-developers http://ift.tt/1YZ0JOx
via IFTTT

T Mobile S7 Gear VR problem

For some reason, my friend's S7 fails to download the Gear VR software. The DL crawls and just stops dead @ 22.6mb every single attempt. Please tell me I am missing something stupid?

from xda-developers http://ift.tt/1WyHc8C
via IFTTT

Cyanogen mod lollipop and galaxy gear.

Hi guys can you connect cyanogen mod with galaxy gear? If yes how? Thanks!

from xda-developers http://ift.tt/1YZ0G5m
via IFTTT

A big big thank you!!!!

I wanted 2 THANK everyone that contributes their knowledge to us numbnuts out here 👍👍 so so much 4 all your hard work & knowledge!!! Got my g3 back up & running, switching from my brand New s7 👎👎 back to my g3.. Story below
👇
About a month or so back I had the 35b bootstack already flashed running vrToxin rom & was showing my gf "the one who was suppose to get my g3" the differences between roms, so decided to flash Jasmine 9.1 & flashed 1st without reading 1st... Bad bad boy!!!! Well u got the black screen with led flashing red/green/blue... No longer had the cord that came with the phone, so my computer wasn't recognizing it 😭 Tried everything, even took it apart n tried the turtorial 4 shorting out the board... Nothing worked, well I got the Galaxy s7 & I cannot live without root, so I decided to look 1 more time & try 2 fix this phone. All cords I tried couldn't get computer 2 recognize phone, tried 1 last cord "MY POWERBEATS2 CORD" & VOILA!!!!! Money shot!!!!! It finally found the phone, flashed back to 10b, rerooted with stump & I'm golden!!!

Sent from my VS985 4G using XDA-Developers mobile app

from xda-developers http://ift.tt/1WyH7Sq
via IFTTT

Where to get OFFICIAL Samsung ROM for Samsung Galaxy S4 Active GT-I9295 I9295XXUCNE5

I have tried to find this ROM, but without success.

Reason is, while I have rooted my phone and update will not anymore over the air work...


Please for direct download link. Thanks.

Baseband is for Germany: I9295XXUCNE5

from xda-developers http://ift.tt/1YZ0FhJ
via IFTTT

xposed for smg530t

is there any possible way to get xposed working on android 5.1.1 on the grand prime for tmobile or metropcs? if there is plz dm how to?

from xda-developers http://ift.tt/1VYHWEY
via IFTTT

Official unlock bootloader said unlocked, but it did not work

Need advice please. Had permission to unlock phone , used mi unlock tool, unlock completed 100%, but phone is still locked. Tried unlock again, at 50% stops and says no need to unlock, so guess it thinks it is unlocked, It is the snapdragon model which according to what I have read should unlock on global stable 7.2.3.0.
Tried to request new unlock from mi, their system will not let you request second one,I have read the unofficial method, I'm reasonable on flashing but the warnings put me off. Any ideas how to proceed? Thanks

from xda-developers http://ift.tt/21kT5zY
via IFTTT

Where to buy a P9 in Australia?

I am looking at options to buy a P9, I am keen to avoid Chinese online stores, any recommendations?

from xda-developers http://ift.tt/1VYHUgk
via IFTTT

Redstone Emoji for Telegram, WhatsApp & build 10586

The new Redstone emoji are awesome, but the release is only in July, if you want to have the new emoji on build 10586 now, I'm uploading the original file here (password: !TBNn7YHqVkN0ChLS18SGq5Apmy0LJVmMrCNbOy4AdGw). It works and was tested on my Lumia 830 & 630. To use the file you can follow the instructions from this thread. (No need to edit the file)

The file is not the same from the PC version, using the PC version also seemed to work on the emulator but I did not test on a phone. Anyway, much safer to use the file from the phone.

Oh, and you can also use the ninja cat emojis, though not directly available in the keyboard you can still input typing two emojis:
Cat + Silhouette = Ninja Cat
Cat + Laptop = Ninja Cat on Laptop
Cat + Dragon = Ninja Cat riding T-Rex
Cat + Rocket = Ninja Cat with Space clothing
Cat + Motorcycle = Flying Ninja Cat (Motorcycle is not available through the keyboard, but shows when you write motorcycle)
Cat + Coffee = Ninja Cat with Coffee (does not work, and I don't know why)

Obviously only those that are using the redstone emoji will see the ninja cat, as only they have the support.



---

Now you might have noticed that both Telegram and WhatsApp always display the ugly iOS emoji. Well, I changed that.

I went on a huge work to export the font files to svgs and then to pngs, not an easy job seeing these are non-standard and not all software managed to deal with it very well. Also needed to rename the files according with the Unicode values and place them inside the collection files. I guess this all took much more than 24 hours of work time, as it took me more than a week to accomplish. The result however is awesome, as now I can have these great emoji rather than the horrible iOS version.

Download - password: !GL2VpgpWgAVngXSokqoFhrj-Qe2sHI5cXuFrxSkRpLQ

To install you need Full FS Access, the readme inside the file tells you where to replace the files. Every update from the apps will replace the files to the iOS emoji so you'll need to replace the files again. But since the updates are not that much frequent, replacing the files takes just a few seconds and the result is awesome it should not be a hassle. ;D

On WhatsApp I needed to create some custom emoji as the family emojis are too wide for the square WhatsApp expects. And for you homosexual couples I created the homosexual couples with a heart emojis on WhatsApp since Microsoft forgot about them.

Tell me if you find any bug with them or if Microsoft updated any emoji.

from xda-developers http://ift.tt/21kT5zG
via IFTTT

Kitkat for e2353

Hi All,

Is it possible to install kitkat on e2353?
How?

from xda-developers http://ift.tt/1VYHTZT
via IFTTT

Head Phone not detect in Miui 7

I had an problem when I try head phone my Redmi 2 prime not detect Headphone and I try many head phones but i t can't detect

from xda-developers http://ift.tt/21kT3rI
via IFTTT

[App] [Theme] Lolipop style for cm10.1/11/12/13

This theme will give u the Lolipop experience on any 4.0 rom.

Features :


Transparent background

Lolipop framework

Lolipop systemUi

Lolipop recent apps

Smooth Animations

Many themed app (ex-root xplorer,playstore)

Here's the orginal thread regarding this theme..

Materiyo10

Get it and enjoy.

And don't forget to hit a thanks.

from xda-developers http://ift.tt/1VYHTJt
via IFTTT

TWRP Backup Restore-All Partitions

Hi, I have flashed latest stock with rootable kernel, DRM Restore & SU zip installed. Took backup all the partitons using TWRP 3.0 Recovery.
If I want to restore the backup, can I restore all partitions? or Only few like System, Data & Caches?

from xda-developers http://ift.tt/1VYHVRy
via IFTTT

bricked ma phone

hey gys need help
ma honr 4c is bricked i think its a softbrick because the phone turns on
but iam not able to get to twrp.
iam not able to acess bootloader s there any way i can fix my device ?

when i connect my device to pc its not detected...

hope you guyz have a solution :crying::crying::crying:

ma device : HUAWEI HONOR 4C(CHM-U01) Indian version

THANKZ

from xda-developers http://ift.tt/21kT4Mc
via IFTTT

Q about rooting my N920CD

Hy every one im actually new to samsung and want to root my N920CD which is on android 6(marshamallow)
i found a CF-auto root file which is for n920C android 6 will it work for me without problem?
also if it works how can i make everything undo? in case i want to sell my device and ....
tnx for your answres

from xda-developers http://ift.tt/26D4NcV
via IFTTT

Bricked Galaxy Tab 2 10.1 P5100

I was flashing a Rom when out of nowhere, status 7 appears. It booted lots of times, and now won't turn on. When I plug it to the wall, it shows the battery about to charge, like waiting, but no charging. The computer recognize it for a second, and won't boot recovery or download. Pls help.

from xda-developers http://ift.tt/1O29q4O
via IFTTT

[MM]FB Messenger Video Call Low Volume on Speaker

Hello,

Anyone experience this?
Is it just me or Z2 speaker is really quiet when doing fb video call. I can barely hear the person I'm talking to.
I don't think it's the app cause in other phones, volume seems to be easily heard.

TIA!

Sent from my D6503 using Tapatalk

from xda-developers http://ift.tt/26D4LSs
via IFTTT

Can i Replace my moto 360 1st Battery 300m with LG watch R Battery 410m ?????????

Can i Replace my moto 360 1st Battery 300m with LG watch R Battery 410m ?????????
did anyone tried it ???
if not
i hope someone will tried it

from xda-developers http://ift.tt/1O29nG4
via IFTTT

Evo 3d media rom

I was thinking. I have had this phone for a very long time. Not in use but i still have it and It would be a perfect phone to use as a media player. Is there a media rom out there whith no radios and apps active; or is there a good rom base that i can use to debloat to turn into a 100% tablet wifi only rom

from xda-developers http://ift.tt/26D4Jdg
via IFTTT

Battery life unstable from 30%

I am on GT-I9192 cm 13 ( Feb 12 security patch) and everything works fine. I only have one problem, which is that the battery takes like 5 seconds to go from 30% to 0%
At all other %s battery Is pretty stable

from xda-developers http://ift.tt/1TBqEdF
via IFTTT

Need Help with Coding... Moto 360 Faces

I have a very clean and minimalist Jaquet Droz face I've been working on. The watch has a date bezel and I need to code the date hand to rotate and stop on each day. My efforts have failed due to the fact that I don't understand lua at all. I would appreciate any help from you great people!

from xda-developers http://ift.tt/1WwIqRT
via IFTTT

Plug in ellipsis 8 tablet via usb to quickly congifure settings and install apks

Hey Everyone,

Noob question I have a couple hundred ellipsis 8 I'll be needing to deploy soon and I'm trying to find a way to plug the tablet into a computer(mac/windows) via usb to enable in the settings apps from unknown sources and turn gps to high. I'd also want apps to be moved to the device (installed) rather than me dragging them to the downloads folder and installing them one by one.

Any help would be greatly appreciated as my current process is very time consuming and my googling has turned up nothing.

Thanks ahead of time!

from xda-developers http://ift.tt/1TBqByH
via IFTTT

Android Pay not work until unistall XPOSED

It shows "Android Pay can't be used Google is unable to verify that your device or the software running on it is Android compatible" when I try to add a card.
It does not work when I disable root.
It does not work until I uninstall XPOSED with uninstaller zip.

I just want to know if any Idea to enable XPOSED with Android Pay work? Any hidden module??

HTC A9 Sprite with 6.0.1 stock rom

from xda-developers http://ift.tt/1WwIpNA
via IFTTT

how to add Spanish language to the Canadian variant g900w8

Hi guys, I have an unlocked s5 the g900w8. it is the Canadian model and it does not have the Spanish language just English, French etc.. its currently on 5.1.1 i am willing to root it.. but trying to avoid putting custom rom.. if anyone can help it would be appreciated thanks so much in advance

from xda-developers http://ift.tt/1TBqBhW
via IFTTT

Can't find obb folder! Some help?

Ive used my droid turbo for 18 month or so. I always enjoy the convenience of installing an app first and drag data into the obb folder under emulated/0/Android.
But yesterday, I can't find it anymore(all those app data is not lost). I wanted to create a new obb folder but the phone tell me that the folder already exists. When I connect the phone to my computers(both mac and windows), I still can't find the obb folder and as I drag in a blank obb folder that I've just created, my phone crashed and restart. I used shell to check permission and it turns out the folder is there and I have full permission to Read and Write. And I backed up my device and give it a wipe. But no luck.
So, I know that the obb folder is still there, but hidden. I think it may be the Es explorer since the problem happens after I used es explorer to clean app residue after deleting an app which could trigger the write protection?
So Im bit frustrated after working on the issue or this long. So Im asking you guys, have you ever run into issues like this? Is there a viable solution?

from xda-developers http://ift.tt/1WwIoJL
via IFTTT

Run X11 apps on BQ M10 Ubuntu tablet

Seems like nobody talked about this method. So I'm posting it here.
First of all, install X11 apps using apt-get. You need to first remount your root as read-write:
sudo mount -o remount,rw /

(copied from: http:||askubuntu.com|questions|399709|install-with-sudo-app-get-install-doesnt-work-not-using-locking-for-read-only)

Then, you can first start a builtin X11 app, for example the gedit app from scope. And then run this in terminal:
DISPLAY=:1 codeblocks

If you want to run Qt apps, do this:
export MIR_SOCKET=/var/run/mir_socket
(copied from: http:||askubuntu.com|questions|611274|how-do-i-run-a-mir-application-from-a-command-line)

from xda-developers http://ift.tt/1TBqCT6
via IFTTT

LG G4 Drivers crashing computer

Greetings fellow G4 Users,
A while I tried rooting my new LG G4 with no success. It was due to the fact that my computer crashes whenever I try installing the latest LG G4 drivers. Has anyone else encountered this problem? (I have a custom PC desktop using ssd/Win 8.1/64 bit operation system) Also How can I verify that the drivers were successfully installed on my pc?

from xda-developers http://ift.tt/1WwIlO4
via IFTTT

Flashed hboot-eng.img on HTC desire HD and phone wont boot

Hi,
I have flashed the hboot-eng.mg in an attempt to get s-off onto my htc desire hd, and now it wont boot at all, no signs of life. The battery has died though, and now if i plug it in to my windows computer I can use ADB, but I cannot get into fastboot or hboot. I need help getting back to stock hboot. Before getting bricked, it was s-on, unlocked bootloader, running cyangenmod 12 with twrp 2.8.7.0. Any help would be much appreciated :)
PS I am new to XDA forums, this is my frist post :p

from xda-developers http://ift.tt/1TBqAuk
via IFTTT

Chuwi Hi * Rooting Issues

I just received my Chuwi Hi 8 Tablet today and have been unsuccessfully tried rooting it. I have tried the one click rooters, I have tried the method listed on here and Tech Tablets and nothing seems to be working.

When using the Tech Tablets method I don't seem to be auto rebooting into the CWM recovery in order to flash UPDATE-SuperSU-vX.Xx.zip. What I get is this for script:

E: installer device ignored
FASTBOT INIT...
E: installer device ignored
E:Failed to mount device '/dev/block/sda1' as installer partition using fs_type 'vfat'
ition using fs_type 'vfat'
FASTBOOT CMD waiting...
E:installer device ignored
E:installer device ignored
E:No valid installer medium found
Could not open /sys/devices/virtual/backlight

I am still given the options to reboot droidbot, reboot, recovery or power off.

All I want to do is be able to move apps/games to my SD card on the android side of things.

from xda-developers http://ift.tt/1WwIlgS
via IFTTT

Problem with the apn setting

Recently unlocked my Samsung Galaxy s7 edge. I decided to transfer my sim from my iPhone to my Samsung. I can text and call but my mobile data is not working. I believe it has something to do with my apn settings. But once I try to go to my apn settings it says "Unable to view access point name. Access is restricted to current user profile.

Would love to have someone to help me fix this problem.

from xda-developers http://ift.tt/1TBqBP7
via IFTTT

Odin Back To Older Firmware Version?

I know they were atlest 2 updates we got. I was wondering if we can odin back to the first version before the 2 updates we got.. anyone know where i can get the older firmware stock Tar to flash on Odin? Im guessing it doesn't exist huh?:confused:

from xda-developers http://ift.tt/1rGM0xB
via IFTTT

Nexus 6p & Real Racing 3 issues

I'm sure I'm not the only one having issues with this game on the 6p. At least a quarter of the time I start the game, it freezes and eventually crashes when the first car shows up. At least half the time, the sound is off enough that I mute it. A lot of times, the game is jittery, sometimes to the point I have to force close and restart. I was dealing with it, but then I played it on an iPhone and was shocked at how much faster it loaded and how smooth it played. That is hard for me to say, not being an Apple fan.

Is there anything others have done to minimize these issues? Or, is this just how it is on these phones. I did try searching for answers, but couldn't find anything related to the 6p and RR3. Honestly, I think my old Note 3 handed it better, which makes me think that maybe I wasted my money.

I appreciate any help,

mmmbusby

from xda-developers http://ift.tt/23fE1CR
via IFTTT

Sprint S6 Marshmallow update locked me out with new pin requirement for fingerprint.

I am quite frustrated with MM at this point. My wife's phone Sprint S6 had Lollipop on it, and she set up fingerprint unlock. It did not ask for a pin and there was no backup pin/password set up on the phone. The new MM update rolls around and the policy has changed so that it now requires a pin for the fingerprint unlock and it will not use fingerprint authentication after a reboot or 24 hours of not being used. Well her phone went straight to asking for a pin without one ever being set up and refuses to unlock with a fingerprint. Sprint sent us another phone and I have set it up, but so far the old phone is on and I can do anything you can do with a locked phone on the main screen, take pictures or screenshots, open and close the top menu, but I can't sign in to make any changes. The wifi is on, and it connects to my network. I signed into Android Device Manager and can get it to ring, attempt to reset the lock code which does put up another lock screen but it will not let me unlock the phone. Just keeps going back to the pin. She didn't have a Samsung account so I can't use the unlock on the Samsung page. Took it to a Sprint service center and they couldn't do squat of course. It was another center that told me to go to that one for help. Guess that was just a couple hours drive time wasted.

I now have a spreadsheet of pins I have attempted and it's an hour between attempts but I am getting nowhere fast, and feel like I am wasting time. Since the bootloader is locked I can't get Odin to update it to TWRP, and I have downloaded 5.1.1 to try and push it back but that too is locked out when I try Odin. I logged into the bootloader and have tried to Apply Update from ADB, but I can't seem to find an OTA version of 5.1.1 for Sprint SM-G920P. I can find the .tar.md5 version bit Odin will not let me put it on, I am assuming because it isn't letting me go backward.

I did manage to get all of my contacts off the phone because we still hadn't deleted the bluetooth connection to our car, and it pulls all of the contacts to the car when you connect a phone. So I let it connect to the car, pulled the contacts and then used my phone to video as I scrolled through the contacts and expanded the ones that were truncated on the screen.

The only thing I want now would be some of the pictures, and I can't get to those since there's no micro SD card on an S6. So at this point I don't know if this is just a rant or if someone knows if there is anything I can possibly Update through ADB to help me get into my phone? I have a few more days before I have to send it back to Sprint as they called and wanted it already, but I told them they needed to give me more time since someone (Sprint, Google, or Samsung) let this particular scenario slip by before they pushed this update. Having the phone just sitting here beeping with updates and updating software all the while not letting me in is like it's just screwing with me. If it would just allow the fingerprint to unlock this would be done. Anyone have any ideas?

from xda-developers http://ift.tt/1rGLZdc
via IFTTT

where can I order the right model to use in Canada GSM network ?

Hi there

I am planning to sell my Samsung S7 and replace it with a Huawei P9. Any idea which model I should order to get 4G connections in Canada ?

Please kindly advise ASAP.

from xda-developers http://ift.tt/23fE0iq
via IFTTT

Problem Virus

Hyep guys i got some problem with my tablet 2 10.1 P1500 i got some virus that cannot unistall and when hard reset also it apear on it and install apps that are not usable for me. so there are any solve for my case?
sorry bad english

from xda-developers http://ift.tt/1rGLTlI
via IFTTT

Unlimited data but not tethering

I use tethering feature this past month but i am only allowed 3gb of tethering.

Is there a way when using my hotspot feature. For that feature to take up the data rather than hotspot data?

from xda-developers http://ift.tt/23fDW2i
via IFTTT

is any here intelligent?

Any one can create iOS ROM for Samsung galaxy core gt-i8262. :good:

from xda-developers http://ift.tt/1rGLShB
via IFTTT

Cspire and the Nexus 5.

I might be a little late to get a Nexus 5, but I have Cspire and I was just wondering if a Nexus 5 would work on Cspire. Or for that matter, if any of the newer (5,6,6P,5X) nexxi(Nexuses?) worked with Cspire. I have a galaxy S5 and i love the feel of the Nexus 5, so I would really like to know.
-Will:confused:

from xda-developers http://ift.tt/23fDSzw
via IFTTT

I'm on 13B, Rooted and use the Hotspot hack...

I didn't have internet access at my house and had to use my G4 as my only source of internet via the Hotspot hack. I now have a different reliable internet source at my house.

My question is that if I went back to stock and let the G4 update to the latest stock version can I physically tether using a USB cable and get internet on my laptop thru my G4 when travelling? I know I can't use the Hotspot feature, but I'm wondering if a cable will work. If so I'm in good shape. If Verizon has locked out any way to connect a laptop and get internet thru the G4, even with a cable I need to stay on my old rooted version.

Anyone know the answer. Can you put your G4 in modem mode and connect your laptop via cable and get internet access if not rooted?

Thanks,
-Joe

from xda-developers http://ift.tt/1QGntgg
via IFTTT

Something is messing up our phones

Any solutions. I seen several people with unknown baseband and nothing works . The phone reboots after 20-30 sec odin back with older bootloader don't work . Flashing pit file don't work . Flashing modems don't work . Only thing i haven't tried was flashing a custom rom because the phone wont stay on long enough to transfer a rom over to the phone . I went back to my note 4 for now so either this phone will be a 800 paper weight or we will work as one to get to the bottom of these problems. I didn't do anything out the norm.

from xda-developers http://ift.tt/24bomKH
via IFTTT

Huawei P9 Varients

Hello

Been googling for a while now trying to understand the differences between the Huawei P9 models.

I live in Australia and will be purchasing from AliExpress, but wasn't sure which model is correct for me as there appears to be the following Huawei P9's.

Al00, DL00 and AL10.

Thanks in advance!

from xda-developers http://ift.tt/1QGnroH
via IFTTT

[Kernel+][kipper] Kali NetHunter for the Wileyfox Storm (3.1.0)

WARNING: These builds are currently untested! Proceed with caution, back up your boot partition before installing!
I'm looking for feedback from experienced users right now.

Welcome to the thread on Kali NetHunter for the Wileyfox Storm.

If you don't know what Kali NetHunter is, well, it's the entire Kali Linux operating system in a chroot on your phone, plus a bunch of awesome apps for executing exploits, fixing things, doing cool things. It goes on, I suppose.
I'm gonna be honest guys, I'm not a security person. When it comes to security, I'm more of a Paul Blart.
What I do know though, is that there is apt-get, and apt-get is life.

Find much more information here: http://ift.tt/1Jvjfv5
The answer to all your questions, generally the answer is YES, IT CAN DO THAT.

The installer zip will add a few files (including busybox) to your /system partition, and install all of the NetHunter apps to your /data partition.
The chroot is located in /data/local, so you don't have to worry about your system partition being full. It's full read/write capable.
Understand that the zip will replace your current kernel with a completely different one.
This is necessary because most stock or custom kernels don't provide the drivers needed to operate most of Kali NetHunter's features.

These Kali NetHunter builds are designed and tested for CyanogenMod 13.0.

DOWNLOAD

Current version: 3.1.0 (testing, 2016-04-29)

Download here: http://ift.tt/1QGnssD (testing) and http://ift.tt/1WmfEn0 (chroot)
Your device is: kipper (Wileyfox Storm)

Recommended install method: Use Official TWRP 3 for kipper
Install kernel-nethunter-kipper and nethunter-generic-armhf-kalifs-full-rolling zips in any order.

You can actually only install the kernel if you want to take advantage of its features without having to install the rest of NetHunter!

BEFORE INSTALLING

Do not flash the NetHunter update or chroot zip with a fresh data partition!
Most ROMs will wipe it clean on the first boot if you haven't completed the Android Setup Wizard yet, there's no need to wipe your ROM or data to try it out. I do advise backing up your data partition before flashing the zip though.
(this should no longer be possible now with added installation checks)

Please make sure your phone boots fine and runs fine before flashing NetHunter. It's confusing when people report bugs that exist due to other factors unrelated to NetHunter.

The Kali chroot and apps are installed on your data partition (in /data/local for chroot). To initialize the chroot and install Kali Linux, you need to start the Kali NetHunter app.

The NetHunter installer will automatically install SuperSU in system mode, which I consider to be more stable. Since NetHunter already modifies your system partition, there is no need to use systemless SuperSU anyways.
If you would like to use another root method, or prefer systemless SuperSU, then simply remove the supersu folder from the installer zip and it will proceed without it.

FULL INSTALL STEPS

1. Boot into TWRP.
2. Flash kernel-nethunter-kipper and nethunter-generic-armhf-kalifs-full-rolling zips in any order.
3. Reboot into your ROM.
4. Open the NetHunter app
5. Let the NetHunter app finish setting everything up
6. You're done!

UPDATING TO A NEWER BUILD

Going from 3.0.0 and up, all you have to do is flash the new build in recovery. On some ROMs you may need to wipe dalvik cache.

UPDATING YOUR ROM

To get all your NetHunter and SuperSU functions back after flashing a new ROM, just reflash the kernel-nethunter-kipper zip and the ~60 MB update-nethunter-generic-armhf zip in TWRP.

RUNNING WIFI PENETRATION TESTS

The internal WiFi chipset of the Wileyfox Storm is not capable of running services which use monitor mode such as Wifite. For this, you will need to use a monitor mode capable WiFi adapter through a USB-C host adapter.
As for compatible adapters, I highly recommend the Alfa Networks AWUS036NEH (eBay) which uses the Ralink RT3070 chipset. There are currently no monitor mode supported Wireless-AC adapters available.

Once plugged in, you can run the command from Kali terminal to turn on your adapter:

root@kali:~# ip link set wlan1 up

RAN INTO AN ISSUE OR BUG?

In order for me to help you, you have to at minimum reply with:

• The link to the exact zip you downloaded
• Your device model (it better be kipper)
• The name of the ROM you're flashing it on
• The version and build date of the ROM you're flashing it on
• A complete description of your problem
• Optional: An audio recording of you reading this entire post

If your issue is with a specific app, it might be better to contact the developer of that app.

If your issue is during the installation (ex. flashing the NetHunter zip), then please collect a TWRP recovery.log for me.

If you found a problem and were able to fix it, and no one's mentioned it in the thread already, it would be kind to state the issue and your fix for others to make use of as well.

You can join me and the other NetHunter developers on IRC at the #nethunter room on freenode to more handily diagnose problems together.
I apologize, but I can't do house calls at this time.

KNOWN ISSUES

• USB Keyboard & VNC - Google Keyboard, AOSP Keyboard, CM Keyboard do not work due to a depth bug, use Hacker's Keyboard as a workaround.
• Terminal App - Full screen programs like nano or vi are unusable unless you use the resize command. (type resize when opening a new terminal window)

THE KERNEL

The NetHunter kernel for the Wileyfox Storm is based on CyanogenMod 13.0 nightly kernel sources.
It has the following changes:

• F2FS added using Jaeguek Kim's latest kernel.org:f2fs-stable sources (available on system/data/cache!)
• UKSM - Ultra Kernel Same-page Merging support
• Compiled with -O2 optimizations using GCC Linaro 4.9 2016.02 aarch64 toolchain
• Simple IO (SIO) scheduler as default IO scheduler (updated for modern kernels)
• USB HID Gadget keyboard support
• mac80211 packet injection support
• Westwood, HTCP, or Cubic (default) TCP congestion algorithms (updated with bug fixes)
• savoca's KCAL display color calibration driver
• RTL-SDR, BT RFCOMM, and various WiFi OTG drivers enabled
• NFS and CIFS client support with file caching
• Running in SELinux Permissive mode
• Additional drivers built in for the full Kali NetHunter experience

SCREENSHOTS

DEVELOPMENT

For the kernel included in NetHunter for the Wileyfox Storm, you can find the sources here: http://ift.tt/1QGnr85

See the Kali NetHunter installer source here: http://ift.tt/1pqp4KF
See the Kali NetHunter app source here: http://ift.tt/20tfk6a

DISCLAIMER

I am not affiliated with Offensive Security. They seem like cool guys though.
I'm not even a novice when it comes to security and penetration. I'm just a simple system administrator with a passion for breaking Android.
Please restrain yourselves from asking me security related questions.

NOT SO MUCH AS SEEN ON MR. ROBOT, BUT PROBABLY EVEN BETTER



XDA:DevDB Information
Kali NetHunter for the Wileyfox Storm, Kernel for the Wileyfox Storm

Contributors
jcadduono, The Kali NetHunter team
Source Code: http://ift.tt/1QGnr85

Kernel Special Features:

Version Information
Status: Testing
Current Stable Version: 3.1.0
Stable Release Date: 2016-04-29

Created 2016-04-30
Last Updated 2016-04-29

from xda-developers http://ift.tt/24boiuC
via IFTTT